Difference between revisions of "Chem341:NMR workshop"

From WikiChem
Jump to: navigation, search
(Exercise 1)
(Chemical shift: adjust pic sizes)
Line 39: Line 39:
 
If several functional groups are near to a hydrogen, they will each exert an effect, as in this series of related compounds:
 
If several functional groups are near to a hydrogen, they will each exert an effect, as in this series of related compounds:
  
[[File:341Fig04 2009.png|center|800px]]
+
[[File:341Fig04 2009.png|center|600px]]
  
 
===Exercise 2===
 
===Exercise 2===
 
Exercise 2.  Predict approximate chemical shifts for all the carbon and hydrogen atoms which are explicitly shown in the following molecules:
 
Exercise 2.  Predict approximate chemical shifts for all the carbon and hydrogen atoms which are explicitly shown in the following molecules:
  
[[File:341Ex02 2009.png|center|800px]]
+
[[File:341Ex02 2009.png|center|600px]]
  
 
Once you've worked out the answers, click '''[[:File:341Ea02 2009.png|here]]''' to see my estimates.
 
Once you've worked out the answers, click '''[[:File:341Ea02 2009.png|here]]''' to see my estimates.

Revision as of 01:36, 21 September 2009

This is a workshop introducing the basics of NMR spectroscopy for students of organic chemistry. It is taught as part of the Chemistry 341 course at SUNY Potsdam.

Introduction

Nuclear Magnetic Resonance (NMR) is a property of the nucleus of an atom, concerned with what is known as nuclear spin (I). This is equivalent to the nucleus acting like a miniature bar magnet. Although isotopes can have a variety of values for I (including zero), the most useful for spectroscopy are those nuclei which have I = 1/2 . Fortunately this includes hydrogen 1 (1H), carbon 13, fluorine 19 and phosphorus 31, so that some of the commonest elements in organic chemistry can be analyzed using NMR.

When a nucleus with I = 1/2 is placed in a magnetic field, it can either align itself with the field (lower energy) or against it (higher energy). If radio waves are applied, nuclei in the lower energy state can absorb the energy and jump to the higher energy state. We can observe either the absorption of energy, or the subsequent release of energy as the nucleus "relaxes" back to the lower energy state. Traditionally this was done by scanning slowly through a range of radio wave frequencies (this is called continuous wave, CW). However this has largely been replaced by the faster Fourier Transform (FT) method where one big, broad pulse of radio waves is used to excite all nuclei, then the results are analyzed by computer.

Error creating thumbnail: Unable to save thumbnail to destination

Chemical shift

In a real molecule, the effective magnetic field "felt" by a particular nucleus (Beff) includes not only the applied field B0, but also the magnetic effect of nearby nuclei and electrons. This causes the signal to absorb at a slightly different frequency than for a single atom; it is convenient to reference this resonant frequency to a standard (usually tetramethylsilane, TMS, defined as zero). When we plot the output from this absorption, we obtain a series of peaks known as an NMR spectrum (or "spectra" if you have more than one spectrum) such as the typical example shown in Fig. 2. The difference (in parts per million, ppm) from the zero point is referred to as the chemical shift (δ). A typical range for δ is around 12 ppm for 1H and around 220 ppm for 13C. It is customary to have the zero point at the right hand end of the spectrum, with numbers increasing to the left ("downfield") as shown in Fig. 2. Typical chemical shift values are shown in Tables 1 & 2, and also Fig. 3.

Examples of NMR spectra

Fig. 2: A typical 1H spectrum and 13C spectrum
Error creating thumbnail: Unable to save thumbnail to destination
1H NMR spectrum of para-(tert-butyl)toluene
Error creating thumbnail: Unable to save thumbnail to destination
13C NMR spectrum of para-(tert-butyl)toluene

Tables of chemical shifts

Table 1: Characteristic 1H NMR Chemical Shifts
Type of Hydrogen
(R=Alkyl, Ar=Aryl)
Chemical Shift*
(ppm)
Type of Hydrogen
(R=Alkyl, Ar=Aryl)
Chemical Shift*
(ppm)
(CH3)4Si 0 (by definition)
RCH3 0.9 RCH=O 9.5-10.1
RCH2R 1.2-1.4 RCOOH' 10-13
R3CH 1.4-1.7 RCOCH3 2.1-2.3
RCH2I 3.2-3.3 RCOCH2R 2.2-2.6
RCH2Br 3.4-3.5 RCOOCH3 3.7-3.9
RCH2Cl 3.6-3.8 RCOOCH2R 4.1-4.7
RCH2F 4.4-4.5 R2C=CRCHR2 1.6-2.6
RCH2NH2 2.3-2.9 R2C=CH2 4.6-5.0
RCH2OH 3.4-4.0 R2C=CHR 5.0-5.7
RCH2OR 3.3-4.0 RC(triplebond)CH 2.0-3.0
RCH2CH2OR 1.5-1.6 ArCH3 2.2-2.5
R2NH 0.5-5.0† ArCH2R 2.3-2.8
ROH 0.5-6.0† ArH 6.5-8.5
Fig. 3
Error creating thumbnail: Unable to save thumbnail to destination
Chart of common chemical shift values

Exercise 1

Exercise 1. Predict approximate chemical shifts for all the carbon and hydrogen atoms which are explicitly shown in the following molecules:

341Ex01 2009.png

Once you've worked out the answers, click here to see my estimates.

It should be noted that the positions given in Fig. 3 and Tables 1 & 2 may be only approximate, though for simple molecules they are fairly accurate. Where a wide range of δ is observed, this is indicated in Fig. 3 by use of a double-headed arrow showing the range. Additional nearby electron-withdrawing groups will tend to move the signals downfield. Nearby δ bonds may move the signal either upfield (rarely) or downfield (usually), depending on orientation. In 13C spectra steric factors can have a major effect.

If several functional groups are near to a hydrogen, they will each exert an effect, as in this series of related compounds:

341Fig04 2009.png

Exercise 2

Exercise 2. Predict approximate chemical shifts for all the carbon and hydrogen atoms which are explicitly shown in the following molecules:

341Ex02 2009.png

Once you've worked out the answers, click here to see my estimates.

Equivalence

If two or more protons (or indeed with two or more carbons) are in an equivalent environment, then they will have the same chemical shift and appear as one signal. A common example of this is a CH3 group, where all three protons are always equivalent. In a CH2 group, the two protons are also equivalent, unless adjacent to a chiral center. Look for any plane of symmetry in the molecule, which will render the two halves equivalent. In the examples below, the different types of atom are given a subscript; atoms which are equivalent will have the same subscript.

Exercise 3. Predict how many peaks you would expect to see in the 1H and 13C NMR spectra of the following molecules: