3-Methylbut-3-en-1-ol
Revision as of 20:16, 31 August 2009 by Physchim62 (talk | contribs)
3-Methylbut-3-en-1-ol | |
---|---|
IUPAC name | 3-Methylbut-3-en-1-ol |
Other names | Isoprenol |
Identifiers | |
InChI | InChI=1/C5H10O/c1-5(2)3-4-6/h6H,1,3-4H2,2H3 |
InChIKey | CPJRRXSHAYUTGL-UHFFFAOYAD |
Standard InChI | InChI=1S/C5H10O/c1-5(2)3-4-6/h6H,1,3-4H2,2H3 |
Standard InChIKey | CPJRRXSHAYUTGL-UHFFFAOYSA-N |
CAS number | [ ] |
EC number | |
ChemSpider | |
Properties[1] | |
Chemical formula | C5H10O |
Molar mass | 86.132 g/mol |
Density | 0.853 g/cm3 |
Boiling point |
130–132 ºC |
Refractive index (nD) | 1.433 |
Hazards[2] | |
EU index number | not listed |
GHS pictograms | |
GHS signal word | WARNING |
GHS hazard statements | H226, H319 |
GHS precautionary statements | P210, P233, P240, P241, P242, P243, P264, P280, P303+361+353, P305+351+338, P337+313, P370+378, P403+235, P501 |
Flash point | 36 ºC (97 ºF)[note 1] |
Related compounds | |
Other compounds | 3-Methylbut-2-en-1-ol |
Except where noted otherwise, data are given for materials in their standard state (at 25 °C, 100 kPa) |
3-Methylbut-3-en-1-ol, also known as isoprenol, is a hemiterpene alcohol. It is produced industrially as an intermediate to 3-methylbut-2-en-1-ol (prenol): global production in 2001 can be estimated as 6–13 thousand tons.[3]
3-Methylbut-3-en-1-ol is produced by the reaction between 2-methylpropene (isobutene) and formaldehyde.
The thermodynamically preferred isomer with the more substituted double bond cannot be directly formed in this reaction, but isomerization yields the desired product:
The reaction is catalyzed by any species which can form an allyl complex without excessive hydrogenation of the substrate, for example poisoned palladium catalysts.[4]
Notes
- ↑ Sigma-Aldrich Co. gives a value for the flash point of 3-methylbut-3-en-1-ol of 42 ºC (108 ºF). The difference in the two values does not alter the safety classification of 3-methylbut-3-en-1-ol as a category 3 flammable liquid under the GHS; but the lower value quoted here (from the New Zealand Environmental Risk Management Authority) would make it a class IC flammable liquid instead of a class II combustible liquid under the U.S. OSHA classification (29 C.F.R § 1910.106), and F3 rather than F2 under the NFPA 704 standard.
References
- ↑ Source: Sigma-Aldrich Co., product no. W519308 (data accessed 2009-08-31).
- ↑ HSNO Chemical Classification Information Database, <http://www.ermanz.govt.nz/Chemicals/ChemicalDisplay.aspx?SubstanceID=13375> (accessed 31 August 2009), New Zealand Environmental Risk Management Authority.
- ↑ 3-Methyl-2-buten-1-ol; SIDS Initial Assessment Report; Organisation for Economic Co-operation and Development, May 2005, <http://www.inchem.org/documents/sids/sids/556821.pdf>.
- ↑ See, eg, Kogan, S. B.; Kaliya, M.; Froumin, N. Liquid phase isomerization of isoprenol into prenol in hydrogen environment. Appl. Catal. A: Gen. 2006, 297 (2), 231–36. DOI: 10.1016/j.apcata.2005.09.010.
Error creating thumbnail: Unable to save thumbnail to destination |
This page is currently licensed under the Creative Commons Attribution 3.0 Unported license and any later versions of that license. |