Caesium fluoride

From WikiChem
Jump to: navigation, search
Caesium fluoride
Caesium fluoride
Caesium fluoride
IUPAC name Caesium fluoride
Other names Cesium fluoride
Identifiers
InChI InChI=1/Cs.FH/h;1H/q+1;/p-1
InChIKey XJHCXCQVJFPJIK-REWHXWOFAY
Standard InChI InChI=1S/Cs.FH/h;1H/q+1;/p-1
Standard InChIKey XJHCXCQVJFPJIK-UHFFFAOYSA-M
CAS number [13400-13-0]
EC number 236-487-3
RTECS FK9650000
ChemSpider 24179
Properties[1]
Chemical formula CsF
Molar mass 151.90 g/mol
Appearance white crystalline solid
Density 4.115 g/cm3
Melting point

682 °C (955 K)

Boiling point

1251 °C (1524 K)

Solubility in water 367 g/100 ml (18 °C)
Dipole moment 7.9 D (gas)
Structure
Crystal structure NaCl, cF8
Space group Fm3m, No. 225
Coordination geometry Octahedral (Cs+)
Octahedral (F)
Hazards[2]
Material safety data sheet (MSDS) External MSDS
EU index number not listed
GHS pictograms Skin Corr. 1C, Eye Dam. 1
GHS signal word DANGER
GHS hazard statements H314, H318
GHS precautionary statements P260, P264, P280, P301+330+331, P303+361+353, P363, P304+340, P310, P321, P305+351+338, P405, P501
Flash point non-flammable
Related compounds
Other anions Caesium chloride
Caesium bromide
Caesium iodide
Other cations Lithium fluoride
Sodium fluoride
Potassium fluoride
Rubidium fluoride
Except where noted otherwise, data are given for materials in their standard state (at 25 °C, 100 kPa)
Caesium fluoride sesquihydrate
IUPAC name Caesium fluoride—water (2/3)
Identifiers
InChI InChI=1/2Cs.2FH.3H2O/h;;2*1H;3*1H2/q2*+1;;;;;/p-2
Properties[1]
Chemical formula CsF·1½H2O
Molar mass 178.93 g/mol
Melting point

703 ºC

Solubility in water 366.5 g/100 ml (18 ºC)
Except where noted otherwise, data are given for materials in their standard state (at 25 °C, 100 kPa)

Caesium fluoride is an ionic compound usually found as a hygroscopic white solid. It is more soluble and more readily dissociated than sodium fluoride or potassium fluoride. It is available in anhydrous form, and if water has been absorbed it is easy to dry by heating at 100 °C for two hours in vacuo.[3] It is therefore a useful, less hygroscopic alternative to tetrabutylammonium fluoride (TBAF) and TAS-fluoride (TASF) when anhydrous "naked" fluoride ion is needed. Like all soluble fluorides, it is mildly basic. Contact with acid should be avoided, as this forms highly toxic/corrosive hydrofluoric acid.

Chemical properties

Caesium fluoride reacts usually as a source of fluoride ion, F. It therefore undergoes all of the usual reactions associated with soluble fluorides such as potassium fluoride, for example:[4]

2CsF + CaCl2 → 2CsCl + CaF2

Being highly dissociated, it is quite reactive as a fluoride source under anhydrous conditions too, and it will react with electron-deficient aryl chlorides to form aryl fluorides (halex reaction). Due to the strength of the silicon–fluorine bond, fluoride ion is useful for desilylation reactions (removal of Si groups) in organic chemistry; caesium fluoride is an excellent source of anhydrous fluoride for such reactions (vide infra). As with other soluble fluorides, CsF is moderately basic, because hydrofluoric acid is a weak acid. The low nucleophilicity of fluoride means it can be a useful base in organic chemistry.[4]

Crystal structure

Caesium fluoride has the inverse halite structure, because caesium ions are larger than fluoride ions; in the lithium, sodium, potassium, and rubidium halides, the cation is smaller than the anion. The caesium ions form a cubic closest packed array with fluoride ions in the octahedral holes.[4][1]

Preparation

Caesium fluoride may be prepared by the action of hydrofluoric acid on caesium hydroxide or caesium carbonate, followed by removal of water.

Uses

Caesium fluoride is a useful base in organic chemistry, due the fact that fluoride ion is largely unreactive as a nucleophile. It is reported that CsF gives higher yields in Knoevenagel condensation reactions than KF or NaF.[5]

Removal of silicon groups (desilylation) is a major application for CsF in the laboratory, as its anhydrous nature allows clean formation of water-sensitive intermediates. Caesium fluoride in THF or DMF can attack a wide variety of organosilicon compounds to produce an organosilicon fluoride and a carbanion, which can then react with electrophiles,[1] for example:[5]

CsF desilylation.png

Desilylation is also useful for the removal of silyl protecting groups.

Caesium fluoride is also a popular source of fluoride in organofluorine chemistry. For example, CsF reacts with hexafluoroacetone to form a caesium perfluoroalkoxide salt which is stable up to 60 °C, unlike the corresponding sodium or potassium salt.[6]

Single crystals of the salt are transparent into the deep infrared. For this reason it is often used as the windows of cells used for infrared spectroscopy.

Precautions

Like other soluble fluorides, CsF is moderately toxic.[7] Contact with acid should be avoided, as this forms highly toxic/corrosive hydrofluoric acid. The caesium ion (Cs+), or caesium chloride, is generally not considered toxic.[8]

References

  1. 1.0 1.1 1.2 1.3 CRC Handbook of Chemistry and Physics, 62nd ed.; Weast, Robert C., Ed.; CRC Press: Boca Raton, FL, 1981; p B-91. ISBN 0-8493-0462-8. Cite error: Invalid <ref> tag; name "CRC" defined multiple times with different content
  2. HSNO Chemical Classification Information Database, <http://www.ermanz.govt.nz/Chemicals/ChemicalDisplay.aspx?SubstanceID=16459> (accessed 25 August 2009), New Zealand Environmental Risk Management Authority.
  3. Friestad, G. K.; Branchaud, B. P. In Handbook of Reagents for Organic Synthesis: Acidic and Basic Reagents; Reich, H. J.; Rigby, J. H., Eds.; Wiley: New York, 1999; pp 99–103.
  4. 4.0 4.1 4.2 Greenwood, Norman N.; Earnshaw, A. Chemistry of the Elements; Pergamon: Oxford, 1984. ISBN 0-08-022057-6.
  5. 5.0 5.1 Fiorenza, Mariella; Mordini, Alessandro; Papaleo, Sandro; Pastorelli, Stefania; Ricci, Alfredo Fluoride ion induced reactions of organosilanes: the preparation of mono and dicarbonyl compounds from β-ketosilanes. Tetrahedron Lett. 1985, 26, 787–88. DOI: 10.1016/S0040-4039(00)89137-6.
  6. Evans, F. W.; Litt, M. H.; Weidler-Kubanek, A. M.; Avonda, F. P. Formation of adducts between fluorinated ketones and metal fluorides. J. Org. Chem. 1968, 33, 1837–39. DOI: 10.1021/jo01269a028.
  7. MSDS Listing for cesium fluoride, <http://www.hazard.com/msds/f2/bms/bmsqc.html> (accessed 7 September 2007), hazard.com; .
  8. MSDS Listing for cesium chloride, <http://www.jtbaker.com/msds/englishhtml/c1903.htm> (accessed 7 September 2007), jtbaker.com; .

External links

Error creating thumbnail: Unable to save thumbnail to destination
Wikipedia-logo.png This page was originally imported from Wikipedia, specifically this version of the article "Caesium fluoride". Please see the history page on Wikipedia for the original authors. This WikiChem article may have been modified since it was imported. It is licensed under the Creative Commons Attribution–Share Alike 3.0 Unported license.