Imidazole

Imidazole
IUPAC name	Imidazole
Other names	1,3-diazole 1,3-diazacyclopenta-2,4-diene
Identifiers
InChI	InChI=1/C3H4N2/c1-2-5-3-4-1/h1-3H,(H,4,5)
InChIKey	RAXXELZNTBOGNW-UHFFFAOYAS
Standard InChI	InChI=1S/C3H4N2/c1-2-5-3-4-1/h1-3H,(H,4,5)
Standard InChIKey	RAXXELZNTBOGNW-UHFFFAOYSA-N
CAS number	[288-32-4]
EC number	206-019-2
RTECS	NI3325000
ChemSpider	773
SMILES	n1c[nH]cc1
Properties
Chemical formula	C3H4N2
Molar mass	68.077 g/mol
Appearance	white or pale yellow solid
Density	1.03 g/cm3, solid
Melting point	89 °C (362 K)
Boiling point	268 °C (541 K)
Solubility in water	miscible
log P	−0.02
Acidity (pKa)	14.5
Basicity (pKb)	6.993
Viscosity	2.617 cP (100 ºC)
Dipole moment	3.61 D
Structure
Crystal structure	monoclinic
Coordination geometry	planar 5-membered ring
Hazards
Material safety data sheet (MSDS)	ICSC 1721
EU index number	not listed
GHS pictograms
GHS signal word	DANGER
GHS hazard statements	H314, H302, H361
Flash point	145 °C (293 ºF)
Autoignition temp.	480 ºC (896 ºF)
Except where noted otherwise, data are given for materials in their standard state (at 25 °C, 100 kPa)

Imidazole is an organic compound with the formula C₃H₄N₂. This aromatic heterocyclic is classified as an alkaloid. Imidazole refers to the parent compound whereas imidazoles are a class of heterocycles with similar ring structure but varying substituents. This ring system is present in important biological building blocks such as histidine, and the related hormone histamine. Imidazole can serve as a base and as a weak acid. Many drugs contain an imidazole ring, such as antifungal drugs and nitroimidazole.

Discovery

Imidazole was first synthesized by Heinrich Debus in 1858, but various imidazole derivatives had been discovered as early as the 1840s. His synthesis, as shown below, used glyoxal and formaldehyde in ammonia to form imidazole. This synthesis, while producing relatively low yields, is still used for creating C-substituted imidazoles.

300px

In one microwave modification the reactants are benzil, formaldehyde and ammonia in glacial acetic acid forming 2,4,5-triphenylimidazole (Lophine).

Structure and properties

Imidazole is a 5-membered planar ring, which is soluble in water and other polar solvents. It exists in two equivalent tautomeric forms because the hydrogen atom can be located on either of the two nitrogen atoms. Imidazole is a highly polar compound, as evidenced by a calculated dipole of 3.61 D, and is entirely soluble in water. The compound is classified as aromatic due to the presence of a sextet of π-electrons, consisting of a pair of electrons from the protonated nitrogen atom and one from each of the remaining four atoms of the ring.

Some resonance structures of imidazole are shown below:

Amphotericity

Imidiazole is amphoteric, i.e. it can function as both an acid and as a base. As an acid, the pK_a of imidazole is 14.5, making it less acidic than carboxylic acids, phenols, and imides, but slightly more acidic than alcohols. The acidic proton is located on N-1. As a base, the pK_a of the conjugate acid (cited above as pK_BH⁺ to avoid confusion between the two) is approximately 7, making imidazole approximately sixty times more basic than pyridine. The basic site is N-3.

Preparation

A ball-and-stick model of imidazole, showing carbon-carbon and a carbon-nitrogen double bonds.

Imidazole can be synthesized by numerous methods besides the Debus method. Many of these syntheses can also be applied to different substituted imidazoles and imidazole derivatives simply by varying the functional groups on the reactants. In literature, these methods are commonly categorized by which and how many bonds form to make the imidazole rings. For example, the Debus method forms the (1,2), (3,4), and (1,5) bonds in imidazole, using each reactant as a fragment of the ring, and thus this method would be a three-bond-forming synthesis. A small sampling of these methods is presented below.

Formation of one bond

The (1,5) or (3,4) bond can be formed by the reaction of an imidate and an α-aminoaldehyde or α-aminoacetal, resulting in the cyclization of an amidine to imidazole. The example below applies to imidazole when R=R₁=Hydrogen.

Formation of one bond

Formation of Two Bonds

The (1,2) and (2,3) bonds can be formed by treating a 1,2-diaminoalkane, at high temperatures, with an alcohol, aldehyde, or carboxylic acid. A dehydrogenating catalyst, such as platinum on alumina, is required.

The (1,2) and (3,4) bonds can also be formed from N-substituted α-aminoketones and formamide and heat. The product will be a 1,4-disubstituted imidazole, but here since R=R₁=Hydrogen, imidazole itself is the product. The yield of this reaction is moderate, but it seems to be the most effective method of making the 1,4 substitution.

Formation of Four Bonds

This is a general method which is able to give good yields for substituted imidazoles. It is essentially an adaptation of the Debus method called the Debus–Radziszewski imidazole synthesis. The starting materials are substituted glyoxal, aldehyde, amine, and ammonia or an ammonium salt.

Formation from other Heterocycles

Imidazole can be synthesized by the photolysis of 1-vinyltetrazole. This reaction will only give substantial yields if the 1-vinyltetrazole is made efficiently from an organotin compound such as 2-tributylstannyltetrazole. The reaction, shown below, produces imidazole when R=R₁=R₂=Hydrogen.

Imidazole can also be formed in a vapor phase reaction. The reaction occurs with formamide, ethylenediamine, and hydrogen over platinum on alumina, and it must take place between 340 and 480 °C. This forms a very pure imidazole product.

Biological significance and applications

Imidazole is incorporated into many important biological molecules. The most pervasive is the amino acid histidine, which has an imidazole side chain. Histidine is present in many proteins and enzymes and plays a vital part in the structure and binding functions of hemoglobin. Histidine can be decarboxylated to histamine, which is also a common biological compound. It is a component of the toxin that causes urticaria, which is another name for allergic hives. The relationship between histidine and histamine are shown below:

One of the applications of imidazole is in the purification of His-tagged proteins in immobilised metal affinity chromatography(IMAC). Imidazole is used to elute tagged proteins bound to Ni ions attached to the surface of beads in the chromatography column. An excess of imidazole is passed through the column, which displaces the His-tag from nickel co-ordination, freeing the His-tagged proteins.

Imidazole has become an important part of many pharmaceuticals. Synthetic imidazoles are present in many fungicides and antifungal, antiprotozoal, and antihypertensive medications. Imidazole is part of the theophylline molecule, found in tea leaves and coffee beans, which stimulates the central nervous system. It is present in the anticancer medication mercaptopurine, which combats leukemia by interfering with DNA activities.

Industrial applications

Imidazole has been used extensively as a corrosion inhibitor on certain transition metals, such as copper. Preventing copper corrosion is important, especially in aqueous systems, where the conductivity of the copper decreases due to corrosion.

Many compounds of industrial and technological importance contain imidazole derivatives. The thermostable polybenzimidazole PBI contains imidazole fused to a benzene ring and linked to a benzene, and acts as a fire retardant. Imidazole can also be found in various compounds which are used for photography and electronics.

Salts of imidazole

Salts of imidazole where the imidazole ring is in the cation are known as imidazolium salts (for example, imidazolium chloride). These salts are formed from the protonation or substitution at nitrogen of imidazole. These salts have been used as ionic liquids and precursors to stable carbenes. Salts where a deprotonated imidazole is an anion are also possible; these salts are known as imidazolide salts (for example, sodium imidazolide).

Related heterocycles

• Benzimidazole, an analog with a fused benzene ring.
• Dihydroimidazole or benzimidazoline, an analog where 4,5-double bond is saturated.
• Pyrrole, an analog with only one nitrogen atom in position 1.
• Oxazole, an analog with the nitrogen atom in position 1 replaced by oxygen.
• Thiazole, an analog with the nitrogen atom in position 1 replaced by sulfur.
• Pyrazole, an analog with two adjacent nitrogen atoms.

Further reading

• Snyder, H. R.; Handrick, R. G.; Brooks, L. A. Imidazole. Org. Synth. 1942, 22, 65, <http://www.orgsyn.org/orgsyn/orgsyn/prepContent.asp?prep=cv3p0471>; Coll. Vol., 3, 471.
• Imidazole; SIDS Initial Assessment Report; Organisation for Economic Co-operation and Development, August 2005, <http://www.inchem.org/documents/sids/sids/288324.pdf>.

External links

• International Chemical Safety Card 1721
• Biodegradation and Bioconcentration of imidazole from the National Institute of Technology and Evaluation (Japan)